ifi micro iTube2
429 EUR / In stock.
The original iTube became the ‘go to’ tube buffer for any and every home audio system. We have redesigned the micro iTube2 with new parts and new circuitry using trickle-down technology from the flagship ‘Pro’ series. Only the GE5670 tube remains.
The micro iTube2 is a tubed output stage, tube preamp, tube buffer AND an impedance-matching device all in one. There is nothing like it. You can put the micro iTube2 before a solid-state preamp and another one after it, creating the effect of tubing the whole audio chain. Or you can choose to simply use the micro iTube2 as a very high-quality preamp by itself.
The micro iTube2 sounds by and far, like a tube amplifier ‘done right with the inimitable magic of tubes.‘ Tonality and heft, especially in the mid-range and bass frequencies are increased to elevate the whole audio system from $100k to $1k. The micro iTube2 injects a serious does of tube magic into any audio system.
|‘Magic’ of SET, Push-Pull or Classic Tube sound|
|In the ‘magic of tubes’ listening stakes, the iTube2 offers the listener the choice of different key sonic signatures:|
|Tube:||NOS GE 5670×1|
|Maximum output:||> 7.75V (>+20dBu)|
|SNR:||119dB(A) re. 2V, buffer,
|DNR:||31dB(A) re. +20dBu, buffer,
|THD & N:||< 0.009% (re. 2V, buffer, 0dB
Gain, A- weighted)
|Frequency Response:||< 10Hz -to > 200kHz (-1dB)
20Hz – 20kHz (+/-0.003dB)
|Input impedance:|| 1M ohm Direct Tube Buffer
100k ohm Pre-Amplifier
with Volume Control
|Output stage output impedance:||<1 ohm|
|Corrected output impedance:||<150 ohm|
|Input voltage:||AC 100-240V, 50/60Hz|
|Power consumption:||<4W idle, 10W max|
|Dimensions:||175(l) x 67 (w) x 28 (h) mm|