The GO pod is a pair of wearable Bluetooth DAC/headphone amps designed to make your premium in-ear monitors (IEMs) wireless.
It is the first device in the world to support Hi-Res 96kHz/24bits with LDAC and Qualcomm Snapdragon Sound Bluetooth codecs on TWS.
Given the quality of the GO pod’s circuitry, when combined with a well-chosen pair of high-performance IEMs, the resulting sound is far in advance of any ‘true wireless’ earbuds or Bluetooth headphones.
Using a pair of GO pods is simple. First, detach the cable from your favourite IEMs and connect the earpieces to the left and right pods. Then, pair the pods with your source device (a smartphone, for example) and hook the ergonomically designed ear loops around your ears to ensure a comfortable fit… the result is unrivalled TWS (True Wireless Stereo) headphone sound.
Hi-res Bluetooth
Qualcomm’s 24-bit aptX Adaptive format is also covered, offering sample rates of up to 96kHz, with the additional benefit of QHS (Qualcomm High Speed) providing an extra 300kbps of bandwidth. Other supported codecs include regular aptX, AAC and SBC.
This means that every possible source device is handled at the highest audio resolution its Bluetooth specification allows.
Connectors abound
IEM manufacturers use a variety of connection types, but whichever is used by your favourite brand iFi has it covered. The GO pod’s detachable ear loop contains the IEM connector, and these are interchangeable.
The standard GO pod package contains the 0.78mm 2pin and MMCX connectors.
Pentaconn, T2 and A2DC connectors are available separately.
Distinctly different
True wireless earbuds rely on the SoC (System on a Chip) solution to integrate the requisite tech into a tiny space. Crucial stages like Bluetooth decoding, digital-to-analogue conversion and amplification are all-in-one to save space and cost. This compromises sound quality.
The GO pod is distinctly different. Each critical stage is designed separately and optimised individually to ensure excellent sound quality – Bluetooth, DAC and amplification. Discover more about the tech below.
Much like top-level hi-fi loudspeakers, high-quality corded IEMs are engineered for sonic excellence, combining multiple hi-tech drive units to transmit sound directly into your ear canal.
Given the high-level of audio engineering in both, connecting a pair of these IEMs to the GO pod results in sound that is so much better than regular true wireless earbuds.
Charge!
The GO pod comes with a smartly designed charging case, with softly lined internal compartments and sufficient room to accommodate connected IEMs as well as the pods themselves.
A 1500mAH rechargeable battery is built into the charging case; a pair of GO pods will play for up to seven hours on a single charge, while the case provides multiple recharges to enable up to 35 hours of playing time. The case supports both Qi wireless charging and USB-C fast charging.
IEM not includet.
Spezifikation
Connector 0,78 mm 2-Pin- und MMCX-Anschlüsse
| Automatische Impedanzerkennung | 16Ω / 32Ω / 64Ω / 300Ω | |
| THD | + Noise ≤0.002% (1KHz/32Ω) @ (20-20KHz) | |
| max. Ausgangsleistung | 120mW@32Ω; 4V@300Ω 16Ω： ≥0.98V/60mW 32Ω： ≥1.96V/120mW 64Ω： ≥2.77V/120mW 300Ω：≥4.0V/53mW |
|
| SNR | 32Ω ≥ 129dB (A) / 300Ω ≥ 132dB (A) | |
| THD+N | ≤0.002% (1kHz/32Ω) | |
| Bluetooth Version | Bluetooth 5.2™ |
|
| Bluetooth Codecs | LDAC*, LHDC/HWA*, aptX Adaptive, aptX, AAC, SBC |
|
| Bluetooth Chipsatz | Qualcomm QCC 5100 Series | |
| Frequenzbereich | 10 Hz - 20 kHz (-3 dB) LDAC | |
| Abmessungen GO pod | 43,5 x 16,4 x 9,5 mm | |
| Abmessungen Ladeetui | 116 x 76 x 38,5 mm | |
| Gewicht | GO pod 12 g Ladeetui 126 g |
|
| Stromversorgung | 5 V / 1 A oder 5 V / 2 A Qi zertifiziertes Ladegerät |
|
| Akku | GO pod 180 mAh Ladeetui 1500 mAh |
