Sparkler Audio model S512 "perceive" 16-bit D/A Processor

Regular price €1.159,00

Tax included.

Digital beyond digital.

To expand the music hidden in digital sound sources to a more pleasant sound, we have developed a new digital-to-analog conversion “D/A Processor”. Digital sound quality that has been difficult to solve so far has been overcome, and a natural sound space close to high-quality analog records can be obtained. Since the main unit is an I2S input, if you change only the conversion adapter such as coaxial, USB, optical fiber, etc., this single unit can support various music sources.

Features

I2S Conversion Adapter ― Plug-in digital audio interface


Since the main unit is an I2S input, if you change only the conversion adapter such as coaxial (S/PDIF, 75 Ω), USB, optical fiber (TOSLINK), etc., this unit can be used for various music sources. Of course, the model S507 CD Transport can be connected directly with I2S.

Smart Size ― Easy to wiring from rear panel.


In size-held (100×200mm) in one hand, you do not choose a place to put it. Since the depth is narrow, it does not get in the way routing of the wiring from the rear panel.

Japanese Taste ― The texture of Japan.


Elegant and cool, finished with a timeless design. The color of the handmade Japanese paper is by hope, you can choose from below color variations. You can also choose gray-smoke monotone top panel.

Main Unit (S512u)

  • D/A converter: 16-bit non-oversampling DAC, Philips TDA1543
  • Rate: 32kHz, 44.1 kHz, 48 kHz
  • Digital input: I2S, +5V for conversion adapter (plug-in interface)
  • Output stage: Fully discrete BJT/JFET I/V conversion, phase correction, harmonic generator
  • Line output (voltage-mode): Unbalanced RCA pin jack max 2.0 Vrms (0dB, 10 kΩ load), L/R stereo x1
  • Line output (current-mode): Unbalanced RCA pin jack max 5.5 mAp-p, able to connect to 0 Ω devices
  • Chassis: Stainless steel (hairline finish), Acrylic top panel
  • Size: W200 × H46 × D100 mm
  • Weight: 700 g (without power cable)
  • Accessories: Power cable, manual

AdOn - Plug-in Interface Adapters

Adapter for COAXIAL ― S/PDIF

    • Interface: RCA pin jack, S/PDIF (coaxial 75 Ω)
    • Also selectable BNC 75 Ω type jack
  • DAI: Wolfson WM8805 receiver
  • I2S output: Neutrik 5 pins XLR, 30 cm, powered by main unit
  • Weight: 230 g (with cable)

Adapter for USB ― PC interface

  • Interface: USB 'B' type receptacle, self-powered, available PC, tablet & smart phone
  • DAI: Burr Brown PCM2706C USB-I2S mode
  • I2S output: Neutrik 5 pins XLR, 30 cm, powered by main unit
  • Weight: 230 g (with cable)

Adapter for OPTICAL ― TOSLINK optical fiber cable

  • Interface: square type, TOSLINK (optical fiber)
  • DAI: Wolfson WM8805 receiver
  • I2S output: Neutrik 5 pins XLR, 30 cm, powered by main unit
  • Weight: 230 g (with cable)

Interconnect cable for I2S ― Connect to S507 or any I2S devices

  • Interface: 4 pin connector, unbalanced/single I2S (not LVDS/HDMI)
  • DAI: DAI signal BCLK / WS (LRCK) / DATA / GND
  • I2S output: Neutrik 5 pins XLR
  • Cable length: less than 1 m